On 7 Mar 2006 13:34:41 -0800, "luc" wrote:
getting back to Speckfisher's original post, is there a way to test
NMEA out/in with a meter, or do you need a laptop/software to do so?
You can see if an NMEA device is outputting data using a voltmeter. I
prefer an analog meter, but DVMs can also work, unless they are very
slow reading.
Set the meter to read 5 volts, and, if there is data present, you
should see it wiggling - with the voltage varying around 2 - 3 volts.
The data line will acutally switch rapidly between 0 and +5 volts, but
the meter won't be able to follow it.
--
Peter Bennett VE7CEI
email: peterbb4 (at) interchange.ubc.ca
GPS and NMEA info and programs:
http://vancouver-webpages.com/peter/index.html
Newsgroup new user info:
http://vancouver-webpages.com/nnq