" *JimH*" wrote in message
news
"NOYB" wrote in message
nk.net...
" *JimH*" wrote in message
. ..
"NOYB" wrote in message
ink.net...
wrote in message
oups.com...
NOYB wrote:
wrote in message
ups.com...
NOYB wrote:
wrote in message
oups.com...
(!) He
looked really puzzled after he asked whether we had our
sanitation Y
valve wired shut and I told him "no". I let him stew for a few
seconds
before telling him we have an approved Type I MSD.
Whenever a vessel equipped with a Type I or Type II MSD (these
types
discharge treated sewage) is operating in an area of water that
has been
declared a No Discharge Zone, the MSD cannot be used and must be
secured
to
prevent discharge.When operating in a No Discharge Zone, a Type I
or Type
II
MSD must be secured in some way to prevent discharge. Closing the
seacock
and padlocking, using a non-releasable wire-tie, or removing the
seacock
handle would be sufficient.
http://www.boatsafe.com/nauticalknow...ting/4_2_f.htm
Chuck,
If you have a Type I or Type II MSD, the MSD must be secured with
a
seacock
and padlocking or wire-tie.
From the definitions that I've read, it appears that I have a Type
III
MSD...and only the Type III MSD doesn't need to be padlocked or
wired
shut.
Your Type I MSD *does* need to be secured according to the
description
that
I posted above.
You've got it backward, NOYB.
"Whenever a vessel equipped with a Type I or Type II MSD (these types
discharge treated sewage) is operating in an area of water that has
been
declared a No Discharge Zone, the MSD cannot be used and must be
secured to
prevent discharge."
http://www.boatsafe.com/nauticalknow...ting/4_2_f.htm
Here's the portion that you keep overlooking:
"Whenever a vessel equipped with a Type I or Type II MSD (these types
discharge treated sewage) is operating in an area of water that has
been
declared a No Discharge Zone,............................
Most of Puget Sound is *not* a no discharge zone. It is, of course,
illegal to discharge *untreated* sewage anywhere in inland waters or
less than three miles off shore. The difference is that in a "no
discharge zone" you can't dump treated sewage, either.
Thanks.
Are you going to believe me now?
I believed you before. I just was confused as to why Gould felt that he
didn't need to secure his Type I MSD...and the answer was that he was not
in a "No Discharge Zone".
So tell me...
How do I use wire to secure my thru-hull seacock?
Remove the handle or wire the handle closed with a plastic wire tie.
Plastic suffices?