These pics should help you modify or construct a rudder
suitable to your needs.

Regards,
JR


http://members.shaw.ca/matildasail/b...s/brochure.pdf

http://members.shaw.ca/matildasail/b...er%20Blade.gif

http://members.shaw.ca/matildasail/b...er%20Stock.gif

--


---------------------------------------------------------------------
"Eliminate annoying spam!
My mailbox is protected by iHateSpam, the #1-rated spam buster."

http://www.ihatespam.net


"Terry Spragg" wrote in message
...
L Schultz wrote:

I put in on an inland lake in the Midwest US. This year so far they are
maintaining a significantly lower water level, and the spot I have for a
pier has me in about 14 to 18 inches of water. The boat itself has no
problems (22' South Coast) needing really only 10-12 inches depth with
the
keel up, but I have a standard (non-swinging) rudder that appears to need
24-30 inches (+/-) depth.

Does anyone know of any sites that have general plans for building a
swing
rudder? Any other ideas?

Many thanks,

Lloyd

"Nollite illegitimus contarere vos"

My SC22 swing rudder was hinged on a pin mounted in two 1/4" thick
aluminium side plates bolted to the non swinging part of the rudder. The
rudder mounted to the transom on pintles and gudgeons. There were strings
to pull the rudder up and down.

I have tried to find pictures showing that, but cannot. I can tell you
that my rudder assembly floated, a seemingly desirable feature, overall.

The swinging member was fiberglass over foam, a simple flat plate with a
joining flange at the point where the two side pieces were fixed together.
It was not pretty, but worked well. The parts near the swinging pin were
solid glass, altogether about 1.5 inches thick.

The side plates were as wide or a little wider than the rudder blade, and
about a foot tall. The pivot pin was at the rear, about 2/3 span from the
front.

Sorry I can't be of more help.

Incidentally, I had the trailer modified so the x member under the keel
could be unbolted to allow lowering the keel on land for servicing the
cable attachment.

Our sailing days on the "Tipsey Too, Two" Were our finest, overall.

Terry K