"Capt. Rob" wrote in message
ups.com...
Works quite well. The newspaper is dry to the touch and I can still
find
where the water is!

Find someone who has a boat and try it on a one inch or greater cored
deck. Never saw a surveyor use a studfinder. Think of the money you
could make rebadging them and selling at 300% profits.


I just tested it on 1" plywood. I slightly moistened the backside for 10
seconds. The Zircon stud finder correctly showed the size and location of
the moisture spot through one inch of plywood! Easily!!!!

The moisture meter manufacturers are making large profits, the circuitry is
the same, the box is different.

Really, try the thing yourself. Go to Home Depot, purchase one and try it in
comparison to your expensive moisture detector and see. You can return the
stud finder to Home Depot when you are done, doesn't cost you a dime. Or you
can resell the expensive meter on eBay.

Amen!

Bob Crantz, the man who understands complex permittivity measurement!

$26.95 at Home Depot!!!

Save hundreds!!!!

More sensitive!!!!

More portable!!!!!!!

Marine moisture meter manufacturers make big profits - off of Bobsprit!!!!!

Anyone can simply test all of this for themselves while Bob tries to deny
demonstratable fact!!! Watch him flounder about!!!

Robbie, there's a sucker born every minute. Didn't your birth take several
hours?

Bwaahahahaahahahaahahahahahahahahahahahahahaaaaaaa aaaaa!!!!!!!

Costs 1/10 of what Robbie paid!!! More sensitive!!! More accurate!!!!
Better value!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



RB
35s5
NY