Thread
:
Getting foam out of mast!
View Single Post
#
10
Pete C
Posts: n/a
Getting foam out of mast!
On Tue, 01 Nov 2005 22:18:10 +0000,
wrote:
Hi there,
There's been lots of talk about putting foam in Ally masts - any ideas
on getting it out - previous owner of boat foamed in wires - PU foam
injected through 1/4" holes at about 6ft intervals. I now want to
replace these, and revert to internal halyards. Mast is 28 ft and only
access is from foot end. I had considered using plastic pipe with the
end cut like a holesaw and twisting, anyone got any other ideas that
won't ruin the anodising?
Thanks in advance,
David. SY Colros.
Hi,
Does a pressure washer cut it? If so a drain cleaner attachment might
be able to 'burrow' along the mast, they have a forward firing jet and
a few rear firing ones.
If a domestic one doesn't cut it a company that does drain jetting
might be able to help you out.
cheers,
Pete.
Reply With Quote