Getting foam out of mast!
Hi there,
There's been lots of talk about putting foam in Ally masts - any ideas
on getting it out - previous owner of boat foamed in wires - PU foam
injected through 1/4" holes at about 6ft intervals. I now want to
replace these, and revert to internal halyards. Mast is 28 ft and only
access is from foot end. I had considered using plastic pipe with the
end cut like a holesaw and twisting, anyone got any other ideas that
won't ruin the anodising?
Thanks in advance,
David. SY Colros.
|