"Marty Schulze" wrote in message
...
Good tip. A project due up is to remove the oval port trims so as to
replace
the screens. I'll hasten that project now and follow up on your
suggestions.
Thanks.


Stop!! Don't remove the port trims. I made that misteak this summer - what
a job to get it back together. Instead, just remove the rubber gasket from
the inside, replace the screen, add some adhesvie and reinsert the gasket.
Relatively simple job if you don't try removing the trim. I used basic
plastic screening that I picked up at my local hardware store - same for the
adhesive.

Sandy K.
1997 Sea Ray 290 Sundancer.