On Thu, 29 Sep 2005 16:17:27 -0700, "Robert or Karen Swarts"
wrote:

Use your second approach. Definitely put a cloth patch over the job; four or
six oz cloth is sufficient. DO NOT us poly resin; use epoxy.Smooth with
filled epoxy. Barrier coat if you are really fussy.

Bob Swarts

If the crack area of the hull is convex outwards, preparing an epoxy
resin glass patch on kitchen plastic works nicely - held on with duct
tape pro temp, of course.
This can give an excellent surface finish to the repair.

Brian Whatcott Altus OK