"Sparerep" wrote in message
...
On Fri, 23 Sep 2005 23:35:38 -0400, "Doug Dotson"
dougdotson@NOSPAMcablespeedNOSPAMcom wrote:


"Gary G" see.signature@bottom wrote in message
. ..
On Thu, 22 Sep 2005 17:10:16 -0400, "Doug Dotson"
dougdotson@NOSPAMcablespeedNOSPAMcom wrote:

Well, new news. The thruster is fine, it is the control panel that is
bad.
Not
a normal DC motor. Control does not just switch the polarity of the
power
to the motor. Motor has 1 black wire (ground) and 3 red wires. Two of
the
red wires connect to the relays in the module with one or the other
energized
depending upon direction. Not sure what the 3rd red wire does but it
connects
to the module via a separate lug. I can just short the lines at the
control
panel
to activate the thruster. I can replace it with a SPDT switch if I want.
Hopefully
I can find a panel for not too many bucks.

Incidently, anybody know what type of oil this thruster uses? Looks
pretty
light but I haven't a clue. No manual came with it.

Thanks to all that contributed!
Doug
s/v Callista


Read the manual resources. EP90.

No manual came with it.


Gary Gaugler, Ph.D.
Microtechnics, Inc.
Granite Bay, CA 95746
916.791.8191
gary@microtechnics dot com



What model is it?
http://www.side-power.com/sidepower/index.php?id=83

Tom Debski

It's one of the smaller single-prop models. No identifying marks on it with
regard to model number. There is a plate on the motor with some specs.
The control panel is 3 5/8" square and mounts in a 3" square hole. Cable
connecting to it is 3-wire. I suspect it was installed in the mid 90's.

Thanks!
Doug