BoatBanter.com - View Single Post - How Easy to Mount/Dismount Outboard Gas Engine?

Oddgeir Kvien wrote:
wrote:

A 40HP often is bolted to the transom, this takes some more time
to install than a smaller engine. Installing a 9.9 or 15HP can be
done in 5-10min by one person. A heavier engine might need two
persons or a hoist.

How much longer time to install a 40HP than a small engine? Would you
please give me a ball-park figure? Do we need any special expensive
tool that a person is not likely to have?

Sound like this is a two-persons job...

If you have a hoist, one person can do this, but two persons are more
convenient. Time, probably 30 minutes.

The tools you need are a couple of wrenchs. And for the first time
installation you need to drill holes for the mounting bolts. (Usually 4
holes.)

By the way, I have a 40HP Suzuki 4 stroke. It is 108kg, to heavy for
even 2 persons. A hoist is needed, but the I can install it alone. But
it is very convenient to have someone holding the wrench on the other
side when I am tighten the bolts.

--
Oddgeir
Still building a boat
http://www.oddgeirkvien.com/baat