"Albe V°" wrote in message
...
Hi all.

On my First 36.7 boat, I have a B&G H1000 network.

Wind direction is measured by the mast-head arrow, and sent to the H1000
network via the yellow "Wind Interface".

Now, I notice that wind direction is always between 52 and 57 degrees
rightside, even if wind direction si completely different.

I first thought about offset, but this could disturb the displayed
absolute value, not its variation during boat and wind rotation. A full
rotation must display 360° rotation on the display (both digital and
analog display suffer same disturb).

Anyway, offset is now at 0°. and Damping (what is this???) is at 4 (middle
of range 0-9).

I doublechecked each plug, and everything seems ok. Consider that wind
speed (measured by the same masthead assembly and A/D converted by the
same yellow wind interface by B&G) is approximately correct.

I climbed on the mast, and the assembly seem ok, at least, it shows no
damage nor wear.

What can I check?
Does anybody know a 'troubleshooting guide' for this kind of problems?
Or, at least, is anyone able to explain me how the information measured by
masthead sensor is transmitted and received by the wind interface?

Thanks in advance

Alberto

--
"Se viriamo, viriamo viriamo viriamo;
Se andiamo dritti, viriamo"
(Cit. "il tattico")


Alberto,
Post here http://www.ybw.com/forums/postlist.php/Cat/0/Board/pbo and see
what answer you get.You will have to register - free - first.

Philip