Soak any wood on your boat with anti-freeze each year and the wood will
*never* rot.

Fungi can not grow in wood that has been treated with anti-freeze.


"Joe Blizzard" wrote in message
news
Following up on the "what brand boat" thread, I thought I'd pass on my
(admittedly limited) understanding of rot. Wood is pretty durable stuff.
I've heard it called "nature's composite" and that's not a bad
description. The bulk of a wood cell is cellulose, which by itself
wouldn't last long at all, but it's encapsulated in a tough natural
polymer coating that gives it its strength.

Rot is caused by fungi that feed on the cellulose in wood cells. In
addition to the polymer coating that protects the creamy nougat center of
the cells, wood also contains compounds that are toxic to rot-causing
fungi. The effectiveness varies from one species to another, with cedar
and redwood being examples of woods with a high degree of natural
rot-resistance. Treated lumber gets its rot resistance from being
artificially infused with fungi-toxic compounds.

For rot-producing fungi to take hold, you need both air and water, in
addition to wood. Wood is never completely dry (if it was it would become
brittle and unusable), but its normal moisture content is rarely
sufficient to promote rot. You generally need a fairly generous external
supply of water over a relatively long period of time to get rot started.
The air component is important, too. For example, I replaced the rotted
front motor mount in my boat last year. Due to a rather poorly implemented
design, the timbers that made up that mount had been sitting in an
enclosed pool of water for about 27 years, but the rot was confined to the
top section where the mounting screws penetrated the wood, where air was
available. The submerged part showed no signs of rot at all.

If you can succeed in denying rot-producing fungi air and water you can
avoid wood rot indefinitely. Air is just about everywhere we are, so water
is the logical part of the equation to subtract. In wooden buildings, we
concentrate mainly on keeping water from getting to where the unprotected
wood is. And when it does find its way in, we dry it out as quickly as
possible. In a boat, water comes with the territory, so we use coatings to
keep water away from our wood. Our success in maintaining this barrier
varies.