Robert or Karen Swarts wrote:

If the temperature is above 75, don't paint.

Applies tom almost any paint.

Most especially if the sun is shining directly on the surface to be
painted, don't paint.

Applies tom almost any paint.

If it is evening, and the bugs are coming out, don't paint.

Applies tom almost any paint.

Unless you have an environmentally secure and controlled space, pay
special attention to the above three items.

Yep.

Do not leave off painting before the job is complete (a ridge will
result that is impossible to cover up without sanding)

Applies tom almost any paint, especially LPU.


Do not have more than one wet edge to your paint job at any one time
for same reason as above.

Yep

Do recoat within the allowed time window to avoid re-sanding.

Yep


Paul Oman wrote:

we sell LPU paints and I've recently played with them on a 12 ft firefly
sailboat I am restoring. I have tried all the different methods, roll
and tip, expensive brushes, etc. and have pretty much concluded that one
should really spray these paints (I have yet to try spraying!). Yes,
brush/roll application seems to be an art form.

comments anyone?

IMHO, a JGA gun with a 2 qt remote pot which is about $400-$500 for the
package is the only way to go.

BTW, you'll need a compressor that can deliver at least 15 SCFM.

A 5HP, 2 stage compressor with an 80 gal receivor barely does it.

Lew