Doug Dotson wrote:
"Evan Gatehouse" wrote in message
...

DSK wrote:


Some may be interested in my current project, 98% complete at this point:
installing a freezer built into our dinette seat. After a LOT of research
and spreadsheeting all the numbers, I decided on a Waeco (Adler-Barbour)
CU-84 (based on the Danfoss BD-35) air cooled refrigeration unit, with an
exhaust to the outside. The box is insulated on 5 sides with R-28 vacuum
panels. I am currently finishing the lids, a relatively demanding bit of
fiberglassing that I don't recommend.
http://community.webshots.com/photo/...89712634CcPfiT
(next 7 pics)

Fresh Breezes- Doug King

I gotta ask - why the carbon fiber in a freezer?

Evan Gatehouse


You lost me Evan. Where was carbon fiber mentioned?

Doug
s/v CAllista

This picture in your album:

P1000793
Putting in the evap plate & fiberglass panels. Panels are
epoxied together at each corner with a pre-molded fillet.
The front f'glass panel has core-mat & carbon fiber; the
bottomg panel is 4 layers of 8oz f'glass + 3 layers of 5oz
carbon fiber. (pic orientat'n: up = stb'd, left = fwd)

Evan