View Single Post
  #5   Report Post  
Skip Gundlach
 
Posts: n/a
Default

Boy, I hate web-based posting. I replied to this and the computer ate
it, of course, not saving it anywhere for me...

Thanks for the info on non-HF, whip, antenna placement. Our nav VHF is
mast top, our cockpit VHF is on the arch, as are other antennas. We'll
not be using the backstay for an antenna for a variety of reasons,
time, money and security in the potential dismasting among them.

As further background, we have full rails, with the gates combined
electrically with brass straps belowdecks, attached to the arch, the
pushpit and pulpit. We have about 110 lineal feet of 1" SS tube rail,
unless you count the inner rails, plus the arch. In addition we have
the standard 4" copper strapping leading to a sintered bronze Guest
plane below the boat, and also connected to a 3x5' plate under the
workbench top. I think we have a reasonably good ground.

We have an SGC-230 tuner within 2 cable-feet of the whip antenna. We
expect to have an Icom I-802 HF for our HF comms.

Given that we'll have a whip antenna, is centerline, next to the chain
plate, as good as, better or worse than, or something else when
compared to near the side as it was before (but before the arch was
installed)?

Thanks.

L8R

Skip, refitting as fast as I can

Morgan 461 #2
SV Flying Pig
http://tinyurl.com/384p2 - The vessel as Tehamana, as we bought her

"Twenty years from now you will be more disappointed by the things you
didn't do than by the ones you did do. So throw off the bowlines. Sail
away from the safe harbor. Catch the trade winds in your sails.
Explore.
Dream. Discover." - Mark Twain