On Mon, 11 Jul 2005 20:52:59 GMT, Lew Hodgett
wrote:

"Mungo Bulge" wrote:

Put this in your veneer press:
Plywood substrate, wet out with epoxy, snapshots of friends and
family, old newspaper clippings, etc. 6 oz fibreglass cloth, wet out
with WEST SYSTEM 105 Resin and 207 Special Coating Hardener, cover
with a sheet of Formica sprayed with mould release, When it cures, you
will have a montage that is significant, and the texture of Formica
all on a stable substrate. Don't use too much pressure, (10 psi)
Just a thought.


SFWIW, my head has glass laminated over plywood with epoxy, then shot
with high build primer followed by 2 part LP.

Clean up is with a sponge.

Depending on the glass, you may or may not have to fair out the glass
before shooting HBP.

Lew


Yes I did consider that, but I wanted a quick fix, and I wasn't
confident in my ability to produce a finish I would be happy with.

Thanks,

Pete