PU glue should be fine for screwed and glued joints. I use the PL Premuim
construction adhesive that way. With the feinforcment of the wood screws it
fills gaps just fine. It acts as an adhesive bedding. I've also removed
the wood scews after the glue has dried on 2 small boats (bottom skids)
and have had no sign of separation in 3 years. The boats are stored
upside down outside exposed to weather. They don't spend much
(enough) time in the water.

"Norm II" ) writes:
Thanks for the input. Thanks also for pointing out how to search for
previous posts on the subject. I don't like to be a bother with "newbie
questions". I'll certainly check first before being redundant. I'll be using
PU adhesives for now on with good fitting joints, as it is so nice to be
able to use "straight out of the bottle" versus mixing up a "little bit" and
scrambling trying to find a place to "use" the leftover. Thanks again!
Norm




--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned