WOW

ya know...
I completely forgot that I replaced the GPS sensor this year.

The GPS which is a Raytheon 398, is working fine!

I will check the output, making sure that the 601 plotter is set up
correctly
and that the radar is set to receive correctly and I will check all my
connections

I have two 601 units and they both do the same thing

Thanks guys!!!
:-)




On Tue, 28 Jun 2005 05:12:48 GMT, "Bill McKee"
wrote:

I would check the communication settings. sounds like a data overrun. Do
not know if there are stop bits, or a clear to send line. RTFM.

"Big gus" wrote in message
.. .
Hi all

I have this issue
I have done a hard reset on both units

The Raychart puts the chart on the radar screen ok but after about 30
seconds, the chart plotting seems to lock up. With the exception of ,
you can still move the cross-hairs and only the cross hairs. no other
button on the 601 does anything except the power button

If you power off and then back on the 601, it will work fine for abut
30 more seconds.

ANy thoughts?

Thanks
Mark