"Larry W4CSC" wrote in message
...
Big gus wrote in
:

The Raychart puts the chart on the radar screen ok but after about 30
seconds, the chart plotting seems to lock up. With the exception of ,
you can still move the cross-hairs and only the cross hairs. no other
button on the 601 does anything except the power button



When I returned the 2nd corroded-up Raymarine radome to them for "repair",
I also included the RL70CRC color chart plotter/radar display unit with
it.
Raymarine found one hardware fault in it and lots of upgraded firmware to
put in it from all the firmware program corrections and bug fixes
discovered.

Might not be a bad idea to give Raymarine a call with that model and
serial
number in your hand so they can look to see if you need a firmware upgrade
or hardware repair. Their upgrade on ours fixed a niggling problem we had
trying to get the screen to point up to match the boat's course correctly.
It also had an error in the Seatalk communications. Our Raymarine compass
sensor now calibrates properly and the Smart Heading Sensor gyro-compass
unit now gives proper input to the RL70CRC display.

I think you have a firmware fault that needs fixing.

--
Larry

You know you've had a rough night when you wake up and you're outlined in
chalk.

Larry, The 601 and R41 were Raytheon products, not Raymarine. The R41XX was
actually OEMed by JRC.
You are mixing apples and oranges trying to compare it with Raymarine stuff.
Incidentally Raymarine doesn't support the 600 series anymore. Have had to
trash 3 of them this month.
73
Doug K7ABX