"Gepetto" wrote in message
...
I changed the distributor cap, rotor, points, and condensor on an 1989
engine in a Donzi. It will now start like a champ, but won't run past
1000 rpm.
The "professional" mechanic says the timing and compressioin are right,
and I got the plug wires back in the right sequence. He thinks it might
have jumped a tooth in the timing chain.
Anybody with any ideas.
--
Gepetto
Run a compression check on each cylinder. Run a spark gap check on
each cylinder. Check the ignition advance at idle and up.
Then you'll know what the problem is.
Brian Whatcott Altus, OK
|