Sorry , missed a sentence the Liquid nail and the 1/8" spreading trial
was used for the Carpet that was put down.
Thanks,
Brian

Brian Owens wrote:

Jim,
I am in the process for re-flooring my 17' bass boat. Even though it
is not difficult, you do need alot of patients. Basicly all you have
to do is take the old plywood off, and use it as a template. For me I
went to Home Depot and got an exterior OSB board and sealed it with a
epoxy paint, and used a gallon of Liquid nail and a 1/8" spreading
trial . Make sure you seal the edges really good and that should last
you for a while. Good luck and remember.

PATIENTS!
PATIENTS!
PATIENTS!
PATIENTS!

Brian

Jim wrote:

Hello,

Please could anyone advise me: I've got a 15ft fibre glass boat with
wooden
floor the floor has some fibre glass resin at the sides presumably to
fix it
in place.

My problem is the floor is rotten! I also need to get under it to see if
theres any damage
to the bottom of the boat underneath.

Can you please advise me if I should lift this old ply floor or
perhaps seal
it and put another layer of ply and also if there should be many
holes in
it?!?!?!?

Thanks
Jim