On Mon, 06 Jun 2005 18:56:39 GMT,
Teak wrote:

I am close to finishing snip

{begin} My two cents worth...

As a point of note you should be aware
that to epoxy is 100% ok on any (old)
wood surface...
however (yes there is always a but)

The other side of the wood/planking/ply
should NOT have any epoxy/poly material
applied other than the usual painting to
allow the wood "to breath", thereby in
most (not all) cases preventing that
nasty old boogy called ROT to set its
ugly feed in!

{end} My two cents worth...

John
City of Sails
Auckland, New Zealand.