On 4 Jun 2005 20:49:43 -0700, "richard"
wrote:
Thanks Brian and Don
I am a little bit mechanically inclined and do own a multimeter. I will
see if I have specs/diagram somewhere for the control lever
and keep my mechanic's phone number in hand incase I do not feel up to
it. Thanks again
PS-Not sure where you two are from but we had our first summer weather
and it feels great here in Boston
The lake was good for surfboarding and slalom skiing today. Since I
made over the 90HP Johnson OB to dump the varioil feature in favor of
gas/oil mix (cutting the oil low worning sensor at the tank to avoid
false alarms as well) and even more handy, rigging the electric choke
solenoid to work off a cockpit pushputton rather than off the start
position of the ignition switch (which formerly rendered the engine
unstartable when hot) the Procraft/Johnson 90 combination has been
pleasant (its a 17ft fish/ski.)
The temperature varied between 97 and 100 along the road to the lake,
I noticed. Noticed one or two fireworks stands missing. Realised
why, on the drive home: the remains of the plywood frames and skins
were scattered in the drainage ditch nearby. That was a FAST wind
storm last week! An 8 X 12 foot poster on three telephone pole
verticals was down - with the poles snapped at their bases.
Brian Whatcott Altus, OK
|