Hey, get a helicopter to lift it out of there for ya LOL ...is there anyway
of gettng a jeep or something down there with a winch to winch it out ?
"rcoleman" wrote in message
...
Not a bad idea, but this thing is in a spot that won't permit much jacking
I'm afraid. Too soft. "Lift" isn't going to be a word that will fit into
this plan. The roller concept could be part of the answer. I'm most
concerned with how much power will be needed to drag the hull over the
land to water. If I had something to anchor a winch to, I could see it,
but I can't sink a 20 ft piling on the opposite side of the creek. This is
just for fun; a lark if you will. I need an another boat like a hole in
the head. But seeing a perfectly good boat sitting out of water just
calls to me. Perhaps it's just a Huck Finn adventure I'm looking for.
Thanks



"Old Boat Goat" wrote in message
news:uRHme.1521678$6l.1199664@pd7tw2no...
I'd jack it up enough to get some logs, rollers, even some planks, the
wetter and slimier the better, under her, . With some long, strong 2 X 4s
you should be able to lever and skid her into the water. Use some plywood
between the lever and the boat to spread the load if you're concerned
about crushing anything.

Don
an old boat goat

"rcoleman" wrote in message
. ..
Out goofing around yesterday, and found a 23' sailboat high and dry,
maybe 15yds from a navigable creek. I'm guessing it could be dragged
over the marsh and into the water, but even with a really high lunar
tide, it's going to take some force. There isn't anything across from it
to secure a winch, and the creek isn't deep enough to get a big boat in
to drag it off.

Any idea how I can do this?

Ironically I want to float it to another location and beach it there.