View Single Post
  #22   Report Post  
Brian D
 
Posts: n/a
Default

The boats in the links that I gave have minor fairbody and side strakes, in
addition to their 8 to 12 degree deadrise (depends on model). They all work
hunky dory with offset mains. The only thing some owners have said is that
if they offset too far, that they get more cavitation turning in one
direction compared to the other as you might guess. They ALL say (in spite
of that Kraus asshole) that the boats operate fine and that you can't tell
the motor's offset by how the boat handles. They probably lose a little
efficiency since the boat is probably traveling at an ever-so-slight crab
angle when motoring straight ahead (due to the offset line of thrust). But
if so, it's not measurable. These boats get good mileage due to their light
weight and modest deadrise regardless. They are used offshore in Alaska and
have 'seen it all' when it comes to ocean weather/waves/swells, and that
includes with an offset main. As I mentioned, the use of an offset main is
very common on these. It's also common on many of the aluminum boats around
here, and for the same reason. I suppose Krause knows all about commercial
fishing and letting nets out the back, dive doors, etc right? Yeah, right.
I don't know where Kraus is, but he sure ain't from around here and he sure
does NOT know it all. That's for damn sure. I've only just 'met' him and
I'm adding him to my 'blocked' list already. Not worth responding to. What
a dumbass.

Brian D



"Short Wave Sportfishing" wrote in message
...
On Sat, 16 Apr 2005 14:37:40 -0700, "Brian D"
wrote:


Offset motors are NOT unusual, except maybe on white fiberglass bathtubs
with outboards on the back. Dive boats often have offset motors to make
room for a dive door next to the motor that opens onto a swim platform.
As
an example, see the first link below. Boats by this designer range in
size
from 18' to 24' and are very commonly run with an offset main motor, with
or
without a kicker. The designer publishes a formula for how much to raise
the motor versus how far you offset it:

http://www.fishyfish.com/bobbruce/index.html (the main is WAY offset on
this
one, 24-1/2' LOA)
http://www.alaska.net/~tolmanskiffs (the designer's web site)
http://www.fishyfish.com/tolmanskiff.html (several other examples)


Very interesting. Thanks for the post.

I have never seen anything quite like that.

Later,

Tom