Just to verify Larry, the KAM Plus can be set up to automatically
send you position. No computer is required once it is set up. I used
mine in VHF for quite a while like this.

Doug, k3qt
s/v CAllista

"Larry W4CSC" wrote in message
...
"Doug Dotson" dougdotson@NOSPAMcablespeedNOSPAMcom wrote in
:

All the above mentioned TNCs are computerized.

Doug,k3qt
s/v Callista



Just so noone gets too confused, after you have your APRS TNC up and
running, you no longer need to have the computer terminal program
connected
to it to RUN its internal APRS-activated firmware. You plug the GPS data
straight into the modem's serial port for constant RMC statement updates
and it regularly transmits its ARPS broadcast packets on the HF and VHF
transmitters connected to it.....