William R. Watt wrote:
) writes:

Has anyone re-gelcoated their entire hull themselves ?

Not the hull, but had the entire cockpit professionally re-gelcoated
about 8 years ago. It was expensive, about a grand, and took several
days. Major dings and cracks were filled, then the gelcoat was sprayed
on, sanded, compounded and buffed down, more spraying the thin spots,
repeat, etc.; ended up looking like new. Maintenance since then has
been the same old thing, buff and wax.


Boats should come with white rubber or vinyl cockpit liners.
Replace every 5 years or so depending on level of use.
Wipe down with damp sponge otherwise.

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned

With a little care, an original fiberglass surface will last almost
indefinitely. With no care, it will be absolutely usable for a
lifetime, but may not look great.

There are a lot of 30 year old boats around that have not have any care
for quite a while, and most look pretty acceptable.

For those who need to see high gloss, you need to get a grip on what's
really important.