On Sun, 20 Mar 2005 18:47:47 GMT, Me wrote:
In article ,
Wayne.B wrote:
The inverter has a hard wired AC input
coming from your distribution panel, and a hard wired AC output going
back to the panel.
Please clarify the above, as wiring both the input and output of an
inverter to a distribution panel IS really a bad idea, and doesn't
conform to ABS or NEC codes........
============================================
The distribution panel (or behind it) is usually the only place where
you can find a centralized point where you can interrupt the power.
The inverter has to be wired in such a way that it can never see an
independant source of AC power at its output terminals. As long as
both the AC input to the inverter/charger and the inverter output pass
through seperate circuit breakers, there should be no issue with
wiring codes.
How would you do it?
|