On Mon, 28 Feb 2005 22:20:08 -0500, "Jim and Becky"
wrote:

NAPA seal drawers?

Yeah - they have trained seals to help search for parts in the
warehouse.

And is that a seven eighty ninths inch drill bit?

Yep - commonly found at Wal-Mart and other fine establishments.

Or seven eights by nine inch long drill bit?

Or that.

Answer these questions and I promise I'll read the manual before asking more
questions.


ROTFL!!

I should read and edit my own posts right?

NAPA has drawers full of seals for hydraulic, brake or wheel bearings.
Sometimes you just have to match up a seal.

I meant 7/8" wood bit which are only about six inches long.

I know you can get a schematic of the trim/tilt from a Johnson dealer
if they have online capability. Print one right off for you.

As to the manual, the Seloc is pretty complete. You may have to
search for some info as they cover a series of engines, but the
information is solid.

One last thing - try and see if the motor works on the trim/tilt
before you go berserk trying to repair it. Black is common, green is
up and white is down - that's from memory, but I think that's correct.

Good luck.

Later,

Tom