Thread: To Captain Neal
View Single Post
  #4   Report Post  
Sailing Dave
 
Posts: n/a
Default

What sort of weather have you weathered with the Mustard? largest seas I
have seen was 14 footers on Erie and 45 knot winds. The boat didn't mind as
much as I did. I truly didn't think we were coming back. The engine was a
joke and the waves pounded us without mercy. Took on water to the top of
the settee seats. BAD TIME.


"Sailing Dave" wrote in message
rver.com...
Good idea withn the locker door.

Your website says that you can access salt water from the galley sink.
How did you plumb that, or is one of your tanks filled with salt water
and, if so, why?

Did you replace the head?

Did you replace the settee tank itself?

How is your bulkhead fixed to the fiberglass? Is it simply constructed of
marine plywood, or did you glass over the whole thing?

I am planning to do away with the dinette entirely, as I do not really use
it anyway and the lack of floor space under the portside seat is
maddening. I am planning to make a sofa pit out of that side with a
conversion kit to turn the entire space into a bed (for me and wife and
the kids up in the berth) Any experience with this arrangement?

Have you covered the glass ceiling and walls with any sort of fabric at
all?

BTW, you have a fine looking vessel. have you sailed it far? I have done
Duluth to Quebec in two years. I plan a complete tour of the Great Lakes
this summer and a Trans-A the following summer Cleveland to Cleveland,
England.

dave





"Capt. NealŪ" wrote in message
...
Sorry I did not answer your post the first time, Dave.

I thought you were a Bertie the Bunyip sock puppet.

Have you visited my website?

There are lots of pictures there that might help you with your
conversions.
http://captneal.homestead.com/index.html

Just follow the links to the interior where you will see all the
modifications
I have made.
I raised the dinette and put a fill in the water tank on the side of the
raised area. I also put another 18-gallon water tank under the center
of the cockpit between the two large stringers.
I used hand pumps for water both in the head and the galley and have
put tubing with a tee and a valve so I can draw water from either tank
from either sink. I put a cockpit fill (little perfections page) in for
the under cockpit tank but still have to fill the settee tank from inside
the vessel though it is on the side of the settee now so I don't have
to move the cushion. I also got rid of the old, rotten wooden top for
the tank and replaced it with plastic - Star Board.


I got rid of the door to the head and reversed the hanging locker door
so it would open against the mast post. It gives a bit of privacy for the
head this way

The swinging instrument board works well. I now have an outside depth
sounder
which makes the use of the board optional.

I use a 9.9 Honda Four which powers the boat to hull speed at about
half throttle in mild conditions. It gets great gas mileage and is very
quiet. It is on the transom in the factory cut-out.

Feel free to ask more questions here as there are many more
people here who could profit from discussing boats for once.

CN


"Sailing Dave" wrote in message
rver.com...
As I understand it from this newsgroup, you have an identical coronado
to mine, except, I think you have a shoal keel and I do not. Apart from
this difference, I believe they are more or less identical, though i
suspectthat you have updated your interior as your's is a live aboard
vessel. I am currently in the middle of a refit and would appreciate
your advice.

My first concern is the actual eorking infrastructure, I need to replace
or repair the water tank and the water fixtures. Is your tank (or was
it originally) only fillable from inside the boat under the aft seat?
if so, did you refit this item? Did you replace your water fixtures in
the head and galley? if so, how did you pulmb them? Did you fit a
sea-water pump, if so, how is it plumbed to the outside?

I am getting rid of the door on the head and building a nav station
above the port side galley. Any advice?

I am fitting my nav instruments on a swinging peice of teak that will be
able to swing into the companionway while underway. How are your
instruments fit? Do you have an outboard, or one of Coronado's old
saildrive motors. What is your maximum speed underway with motor only?

So many questions, so little space.

Sailing Dave - The Storm and The Spray