Yes, but the key is the number of coats. When I first used it I only put on
1 coat but after a year it started to rust. Since then I usually put on 4
coats and it shows no sign of corrosion at all. It is very wear resistant as
well. Also if there is a chip from it being hit very hard and the paint
comes off to the metal. The rust will not spread under the unaffected area.

"Courtney Thomas" wrote in message
...
Is the Bar Rust significantly more durable in it's rust prevention ?

Since I'm planning on scaling anyway, if I can then apply something
significantly more durable, I'd prefer to do so :-)

Cordially,

Courtney

habbi wrote:

Why would you want to put epoxy resin over it?
If you want an 2 part epoxy rust paint for steel use Bar Rust 235 from
Devoe
Coatings. It is excellent but the OP wanted something simple.

"Wayne.B" wrote in message
...

On Thu, 27 Jan 2005 00:47:35 GMT, "habbi"
wrote:


I have tried a lot of products over the years and the best I found and

the

easiest to use and clean up is called
"Blue Steel"

=====================================

Do you know if epoxy resin will adhere to it?






--
s/v Mutiny
Rhodes Bounty II
lying Oriental, NC
WDB5619