Hi

The CNC is the sideeffect the gain but youdo not need a CNC mashin to
cut the framework , it can be cut with quite tradisional tools or
mashins.
The plans can be plottet on paper in full size and in the simplest way
to make the boat, you simply spray glue the full scale plans ontop the
sheet material and cut from the lines on the drawings, ---- the pieces
will fit together perfect.
But the technology I point to is the simplest and cheapest way to
establish a real digital production, the N.C. cutter is the cheapest
N.C. controlled equipment on the marked, but there are much more to it
--- the concept is a compleat change of aproach it make 4 boats at the
same time as 1 with the old methods.

Ontop there are the thing about materials this method ask only one type
of material sheet material. Where other methods ask 20 different
profiles knees , hangers, stringers nuts and bolts ----- again with the
3D-Honeycomb you do not bend any piece of the ribs or frames , when cut
flat they slide together to form a reliable and in terms of design and
projecting very rugid and simple structure ; again you do not bend one
single piece and pieces when cut fit perfect together, this is very
different from the time comsuming aproach you se in other methods where
fiddeling and bending acturly is a big and time comsuming part of it.
With this method you get the boat in the drawings. and pieces can be
made everywhere are easy to transport before assembling .

Now did I point to the fact that in easy terms and in a way everyone
can understand, computer design and cheap digital projecting make sense
and point to other progress such as how to build a house at a third the
cost so strong it will resist an earthquake , but if this issue
interest you please check the hundreds of structures to explain the
3D-Honeycomb concept, --- how also in architecture the 3D-H structure
offer a new aproach a new way to build and project a building by
offering the basic structure in a way that promise the new jobs and the
cheap strong new houses.

This concept do not deal with rebuilding with dirtbags, barbed wire and
mud --- it promise the new technology at a state everyone can
understand just by looking at it, it acturly make the computer work
where today's design and architect applications mainly is about making
a digital account , it is so different from the old methods and still
it only build ontop and offer just what you can emagine , but in a way
you can call digital.

P.C.