I like to grind down until I see the threads of the cloth almost showing or
just starting to break through. Less resin better bond is a primary rule of
glasswork. It also fairs better.
I also like to thicken with milled glass fiber rather than the usual bulkers
and cabo.
It's the best way to strengthen the weakest part, "the resin".

----- Original Message -----
From: "Evan Gatehouse"
Newsgroups: rec.boats.building
Sent: Friday, December 31, 2004 5:54 PM
Subject: Secondary bond?



"Rob Hart" wrote in message
...
Have a glass fibre moulding, which needs to have another glass part
bonded
to it, after the first part has fully cured.

Would I be right in thinking that an epoxy resin system, with proper
filler
added so it aheres to vertical surfaces, would be the best way of going
about this?

"Evan Gatehouse" wrote in message
...

"Rob Hart" wrote in message
...
Have a glass fibre moulding, which needs to have another glass part
bonded
to it, after the first part has fully cured.

Would I be right in thinking that an epoxy resin system, with proper
filler
added so it aheres to vertical surfaces, would be the best way of going
about this?

Yes, but for best strength you need to rough up the cured part with 80
grit
sandpaper to also provide a mechanical bond.


--
Evan Gatehouse

you'll have to rewrite my email address to get to me
ceilydh AT 3web dot net
(fools the spammers)




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/04