Since I have the same motor I am interested in your problem. Question: how
do you know the pump is not priming?
Gabriel
"Derek Weston" wrote in message
...
On occasions on startup, the oil pump doesn't prime. This is most likely
when the motor has been running for a while, has been shut down, and
is restarted shortly thereafter.

The axial clearance of the pump's gears in the pump body is close to
midrange of Volvo's specification, as is the gear pair backlash.

The dipstick O ring seems OK, as does the fibre washer between the
dipstick housing and the block. The dipstick tube silver soldering into
its housing is OK. (On these engines the dipstick tube doubles as the
suction line for the oil pump.) The wire gauze suction filter is clean.

I'd much like to hear from anyone who has had this problem and fixed it.

(Antispam email address - please make country abbreviation applicable to
a land downunder if replying by email)