Michiel wrote:
Hello,

I have a 3hp Sears Gamefisher aircooled outboard. It's Tanaka 300 with
Sears brand.

It developed a problem:

After running at full throttle with no problems for 10 minutes os so,
it'll start to cut out. The engine speed will drop fast. At first,
it'll keep running and pick up speed again, but it will cut out again
and if I don't close the throttle, it'll get so bad that the engine
dies.

Running it at low rpm for a while eases the problem: I can then get
back to full throttle and it'll take a minute or so before it starts
to cut out again.

Because of the initial time without problem, I'm thinking that the
problem is heat related.

I cleaned out the carb and put in a new spark plug, but no relief. I
also verified that there is good flow through the fuel valve and hose.

Any idea what this could be? Is it more likely an ignition or a fuel
problem? How can I troubleshoot this?

I'd appreciate any advise or pointers.

Thank you,

Michiel
fuel tank vent?

--
""War is an ugly thing, but not the ugliest of things. The decayed and
degraded state of moral and patriotic feeling which thinks that nothing
is worth war is much worse."
John Stewart Mill


I strongly urge everyone reading this to check out WWW.anysoldier.us,
and support our troops with a letter, a package or a donation.