ReelBros wrote in message ...
Hello, I've built a Ken Hankinson design LaPaz22 in 24', in my haste,
and lack of a good belt sander my reverse chines/strakes have some
serious "roller coastering" any suggestions on what to use to build up
low spots, they are epoxied on so i'm doomed.

Install a batten or thin plank along the wavy edge. Cover batten with
plastic (polyethylene), pour any putty, microballoons would be fine.
remove batten, coat with resin, finish.
See the URL in my signatu it is our tech. support site. Some of our
builders may have pictures of the method and will post if you ask the
question there.

Jacques
http://bateau2.com