Some more suspects.
1 Block off plate between riser and manifold
2 Exhaust manifold
3 Intake manifold or gasket
JIMinFL
"Rich Schultz" wrote in message
...
Captain? Jeff,


Numbers 1 through 3 are possible, I do not believe 4 & 5 could possibly
have
anything to do with coolant in the oil. Without more info I would suspect
first the blown head gasket. It would not take much oil in the coolant to
be significant in an analysis.

I would be curious as to where the oil is around a frost/freeze plug that
it
could get into the oil.

Capt. Rich
"Tamaroak" wrote in message
...
I recently had an oil analysis done after changing my oil before winter.
They found a significant amount of antifreeze backed up by my having to
add some during the last part of the season. It's a 1987 5.7L GMC with
closed cooling and 770 hours. It uses no oil and runs great.

I'm trying to determine the possible causes. I've heard:
1. Cracked block
2. Cracked head
3. Bad head gasket
4. Bad frost plug
5. Bad coolant pump (supposedly located on pop of the engine by the
manifold)

Any other ideas?

Capt. jeff




----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000
Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---