Thanks for the confirmation. I've already begun to locate a rebuilder I
used to use for my 25Johnson Duckboat motor. For a mere $70 I'm told he can
put in a new rubber "clutch". This after $600 for a rebuilt foot, which was
on top of $450 for another foot that wouldn't quit leaking, which was after
a "switchbox" failed for $200, which was after I rebuilt the engine ($800
parts and $750 to bore & sleeve two cyl), etc., etc.
Does it ever quit????
LD

"Clams Canino" wrote in message
news:uv7zb.399922$Tr4.1151770@attbi_s03...

That's a Mercury prop.

You need to take it to a propshop and tell them the hub slipped and it
needs
to be "rehubbed" - a common procedure.

-W

"LD" wrote in message
news
I have a 200hp Merc with a SS prop, slightly cupped, brushed finish,
with
the number string 48 73982 A4 21. I'm sure it's a 21 pitch but
apparently the rubber hub has slipped. While running @5600 yesterday,
it
"slipped". Afterwards, couldn't go above a fast idle without it
slipping
again.
Questions: 1. What make prop is this?
2. Is is fixable and how?
Thanks in advance
LD