The pulls will be ABI 330011 recessed hatch lifts with latches. Two per
drawer. Originally I was going to use round push/pop up latches but I have
several extra of these ABI latches left over from the sole hatches. They
are a lot more secure and look real "shippy." :-) Also the push/pop up
latches cost almost twice as much as the ABI latches.

BTW, I found the KV slides at:
http://www.hardwarefriends.com/cgi-b...KV:6400P-18-SS

"Jim Conlin" wrote in message
...
Please share with us the detail for latching them. I'm sure you have a
clever
solution.

Glenn Ashmore wrote:

Thought I would pass this along for any of you considering full
extention
drawer slides. Rutu has 4 larger drawers under the bunks. I had wanted
to
use slides because opening large heavy drawers that might be swolen can
be a
real problem but had given up on the idea because Sugatsune wants $160 a
pair. I just received 4 sets of 22" KV 6400 full extention slides made
of
304 stainless and rated for 75 lbs. Price was $51 a set. They are
actually
a little more substantial than the Sugatsune and a hair thinner. They
come
in 16", 18", 20" and 22" lengths.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com