Please have a look at the hole in this fibreglass boat.
http://www.blueskymarketing.co.uk/boat.htm


professional repairers in UK ( scotland /Glasgow) have proved
too expensive ( £800 ), its an old boat and needs a lot of other
attention

Any thoughts on wether a general DIY guy like myself should handle
a job like this ?

Thoughts are a thin layer of fibreglass sheet on base of boat , then
insert fibreglass mesh into hole , then resin , then another layer of
fibreglass sheet on top in boat , the plan would be to leave the thin
sheets in place
Is this the best way to go about it , any thoughts advice welcomed.


Further any thought on what this boat make/model is or pictures
of how it was kitted out originally would be appreciated

--
Cheers
Paul [Bluesky Marketing]
...............................................
Never Be A Cloud In Anyones Life
http://www.blueskymarketing.co.uk Home :-)
TEL : 0870 321 7888
FAX : 0870 321 5888

http://www.laserpointers.co.uk
http://www.infiniter.co.uk
http://www.noddingtoys.co.uk