View Single Post
  #12   Report Post  
JAXAshby
 
Posts: n/a
Default

Immiscible liquids are liquids that do not dissolve in one another.

so? green traffic lights mean "go", but so what?

Some
combinations of liquids mix in all proportions, e.g. alcohol and water, mix
at some compositions but not at others, or hardly mix at all,


you might wish to check your "facts" with a chemist next time before you open
your mouth.

e.g. gasoline
and water.

"JAXAshby" wrote in message
...
don't tell it to me, tell to those with PhD's in chemistry.

Wrong.

"JAXAshby" wrote in message
...
alcohol and water are 100% missible (sp?) with each other, meaning

there
is no
such thing as a water saturated alcohol solution.

Ethanol, or alcohol, mixes with any water. It's used up here by some

in
the
winter (auto engines) to pick up any condensation and so on to prevent
gas
line freeze. So, if the alcohol in the mix becomes saturated (with
water), a
drop in temperature will cause that water to be dumped, leaving the

water
in
the fuel system ... especially not good in injected engines. If that's
what's happening, maybe a water separator mounted close to the engine
might
be an idea? The dumping of water by saturated ethanol fuel caused by a
drop
in temperature is a fact ... but a 10% mix ... ???

"Larry Weiss" wrote in message
...
Both of my power boats have developed severe engine hesitation
problems. They run okay at idle but sputter and stall when revved.

My
mechanics have complained that they are seeing this problem left and
right - and are blaming it on the gasoline, which around here (Long
Island, NY) now contains 10% ethanol. I know ethanol is not good

for
rubberized fuel lines, but did not know it caused running problems
(unless the fuel lines are deteriorating and clogging). The gas in
each
boat was purchased at a different fuel dock.

If my mechanics are correct, this is a serious regional (national?)
problem. Anyone else experiencing difficulty? Any comments or
suggestions? How can we get gasoline without ethanol in it? How is
the
marine industry addressing this?

Larry Weiss
"...Ever After!"
"a little after..."