Check for voltage with a meter when you have whatever problem you have.
Make sure there is 9.6-12V at the (+) side of the coil of the power to the
ignition module.
Bill

"BenC" wrote in message
om...
(Sean) wrote in message
. com...
I'm still having the same problem. I've swapped out the coil, the
module and the ignition switch and still the same result. Very
frustrating. Any other suggestions would be appreciated. Thanks,
Sean


15amp ignition fuse seems a little lite. check that the main harness
plug at the engine is plugged in correctly, remove it and add
dielectric as well.
if that doesnt work do some basic tests, compression, spark, fuel
pressure etc.
do these while the fault is present.