I have a Mako 25' with a leaning post. The leaning post has two floor
mounts with 8 screws per post. The screws are pretty large, dont have
the exact size. The problem is that on the front of one of mounts two
of the screws have pulled loose from the deck. My issue is how to go
about fixing this.. I have heard that you can Marine Tex the holes
then redrill them out. Not sure how well this might work and I figure
I am going to have to remove all 16 screws to move the post out of the
way before I can do any repair. I was wondering what people thought
of taking a piece of exterior 2x12 and mounting that in the spot on
the deck using 5200 or silicone and some of the original good holes
then mounting the leaning post on to that. I dont want to drill
more holes on the deck and the stress of the existing situation is
just going to get worse.

Thanks for any feedback..

Keith