View Single Post
  #11   Report Post  
tcoop
 
Posts: n/a
Default launching and docking

Thanks to everyone for the advice. I learned alot just by asking on this
group. I'll try differnt things and guess goes what comes easiest for me. I
got lots of good ideas, thanks folks.
Tom


"tcoop" wrote in message
news
Thanks for all the help. Seems like maybe a few trailer modifications and
adjustments and practice is what I need. With the cold weather coming in,
maybe I will just go to the landing and practice putting it in and taking

it
out. Sounds like a lot of trouble, but maybe it will keep me from making a
lot of people mad when the warm weather hits.
Thanks again and happy boating...
Tom at Lake Wylie


"tcoop" wrote in message
news

I put my used pontoon in the water for the first time, this past

weekend.
http://www.coopscorner.com/pontoon/pontoon.htm I am very new to boating

and
would like some advice on my pontoon boat. As I said it is used, but it

ran
good and it pulled well behind my Chevy truck.
I have what I think is a float on trailer and I was wondering about the

PVC
guides. http://coopscorner.com/takealook/pontoon_trailer.htm
I was wondering if someone could take a look at the pictures and see if

you
can tell if the guides are in the correct position..
Any tips on getting it on and off the trailer would be appreciated also.

I
was able to get it back on the trailer, but I had to get in the water a
little further than I thought I should have. My truck was back to where

the
exhaust and half the tires were underwater, which was ok, which was ok,

but
I still had to wade out a little, which I didn't think should have been
necessary. Well maybe it want be necessary when I learn what I am doing.

Any
advice and help is very much appreciated.
tcoop
Lake Wylie SC