Ties on drill bits auto whip.

Cheers

Jonathan Ganz wrote:

Put it on a lanyard before you use it. I lost one screw driver and a drill
bit over the side. Everything else was tied on before I started.

"Maxprop" wrote in message
hlink.net...

"Jonathan Ganz" wrote in message



Why would you not carry a simple tool to do that?

See other posts. I've grown tired of needlessly dropping tools overboard.
Rings are cheap.


I don't recommend rings. They *do* snag lines and when
they do, they're apt to get pulled out enough to finally
finish the job on their own.

Not if you tape them, same as with pins.


Straight cotter pins if put in
correctly will not come out and won't snag with or without
tape.

Um, where are your turnbuckles? On the house roof? Experience: when the
tape chafes through, the bent-over pin ends begin snagging sheets again,
just as they would have done had they not been wrapped. No problem so far
with rings.

Max


"Maxprop" wrote in message

"DSK" wrote in message


N1EE wrote:


What's the best cotter pin type to secure
a turnbuckle?

I like to use an oversized ring type cotter pin. They still have to

be

taped over (it's a commonly heard myth that cotter rings won't snag
lines) but they are easier to use and have longer useful life. Some
people I sail with use safety-pin style cotter pins. These are fine
but I think they are more obtrusive.

Agreed. Rings can be placed or removed without tools, whereas the

split

cotter pins can't.

Max

PS--Doug: Do you live in NC? If so, where? Or at least from what

port

do

you sail?