On Mon, 26 Jul 2004 13:18:55 -0400, "Gary Warner"
wrote:


"Short Wave Sportfishing" wrote in message


I'm having a problem visualizing the fitting - do you mean it's
underwater?

Yes.

Why would they have an exit point underwater? That makes no sense.

Now that you said that, I'd secure/cap that fitting off and put a new
one higher than the water line.

And where do the front pumps empty

There is an above the water line thru-hull on each side
of the bow. Each pump emptys through it's own
fitting.

I'd hook up a T fitting and use that exit fitting.

It would be about 18 feet from the back of the boat
to the front thru-hull. Plus it would be through
a "T" and up a bit to the hole. And I suppose a
check-valve would be needed to keep the water
from pumping back out the other (wrong/pump)
side of the "T". ~ But maybe.

That would work fine actually.

Although that underwater fitting makes me nervous.

Q: Or better to just not worry about it, let the front pumps
do their job, and fix the leak over the winter?

Or you could just not worry about it, let the front pumps do their
thing and fix the leak over the winter.

Aren't you glad you asked? :)

Funny guy.

My long suffering wife of thirty years says that a lot - usually
followed by ~~ expletive deleted ~~.

Later,

Tom