On Tue, 15 Jun 2021 07:05:03 -0400, John wrote:
On Mon, 14 Jun 2021 11:59:01 -0400, "Mr. Luddite" wrote:
On 6/14/2021 8:01 AM, Tom Greene wrote:
Drove boat to a cove and floated for an hour. When I started it, it started right up and sputtered and stalled when I accelerated. After being towed home, I changed the IAC filter and the boat started and ran fine for several cycles. Then it happened again. It started and ran fine. We floated on the lake and died when we accelerated. It starts but stalls after a few seconds. I changed the IAC valve and it started and ran great until we turned it off and restarted. Same thing. It seems to run and idle fine until we accelerate or rev engine. I am back where I started. Any suggestions of what to try next?
Just a guess. I had an older 350 ci I/O that exhibited some of your
symptoms. It would start but die under load. Then it stopped running
Turns out it was a bad, leaking coil. It finally blew the connector
right off the top. It would start again but die as soon as I put
it in gear and tried to move. Towed back to the slip and it started
right up again.
Replaced coil. All was fine.
Sounds like the same symptoms a Moto Guzzi has with a bad coil.
Thanks Donald. Do you miss him yet?
----Android NewsGroup Reader----