On Wed, 11 Mar 2020 12:12:44 -0400 (EDT), Justan Ohlphart wrote:

Keyser Soze Wrote in message:
On 3/11/20 11:27 AM, Justan Ohlphart wrote: Keyser Soze Wrote in message: Well, not really, but...I finally figured out a temporary fix for a shooting-related annoyance.I have three suppressors for my firearms, but not one for each. For the 9mm's and .22LR's, I switch the suppressor from firearm to firearm.The annoyance is the thread keeper/muzzle device that protects the threaded muzzle when a suppressor is not affixed. These are only screwed on hand tight so they remain easy to remove. Problem is, the pass-along impact from shooting the firearms with the thread keeper attached loosens the muzzle device.The answer...plumber's silicone tape. Keeps the muzzle device tight, each to remove.I'm such a genius I should run a Trump Charity. I've never heard of silicone tape. Did you mean silicone calk? There is a product that does exactly what you want. It's called "lock tite" or generically "thread locker. Just don't use too much or the wrong type if
you
intend to disassemble the piece. Good luck, genius, with your shooting annoyances. :-) Meant teflon tape. Locktite is not something I would use for the purpose described, even the non-perm variety.

Why don't you evr say what you mean? Hope a piese of that teflon
doesn't get loose and jam your muzzel.

If you're referring to the muzzle under his nose, I think it would be a boon to all mankind!
--

Freedom Isn't Free!