On Fri, 5 Oct 2018 09:07:54 -0400, Keyser Söze wrote:

One of our neighbors about 10 years ago installed a big manual transfer
switch/breaker switch in his garage, next to the existing breaker boxes. He
has a 10kw genny on a cradle with wheels that he pushes out onto his
driveway and then plugs in to the transfer switch/breaker box. Easy-peasey.

That is about the way mine works. I have a panel interlock instead of
a transfer switch. The inlet for the generator is under a car port on
the far side of the garage, well away from the house along with the
propane gas hookup. It takes a couple of minutes to get it going. It
takes almost as long to swap the handle on the generator from the
storage position to the rolling position as it does to get it hooked
up. The only thing I turn off is the water heater in the panel, air
compressor and the HVAC at the thermostat. Turn on the propane, plug
in the generator and off you go.