On Friday, January 5, 2018 at 11:49:34 AM UTC-5, wrote:
On Fri, 5 Jan 2018 08:32:51 -0500 (EST), justan wrote:

Wrote in message:


My 5.5 KW burned about 0.5-0.6 GPH gasoline and more like 8 on propane
running pretty much 24 hours a day at close to full load. Once I
started running propane, it never turned off. I did trip the breaker
now and then when the loads ganged up on me. ;-)


8 what?
gallons of propane an hour

What is involved in converting to propane?

You remove the carb, install longer studs, slip the propane venturi
over the studs and reinstall the carb. Then you mount the regulator,
hook up the hoses and you are ready to rock. The whole thing takes
less than an hour the first time and I bet I can do it in 15 minutes
now. They give you the initial setting on the control block for nat
gas or propane and you dial it in from there once you get it running.
I may be able to improve the fuel consumption a little but I would
rather be too rich than too lean. I have it pretty close tho.

What are the advantages of running on propane other than the possibility of having a large, buried propane tank as your source? I have a 330 gallon buried tank, but at 8 gallons an hour and an ~80% fill, that's less than 2 days run time. That equates to about 20 gallons of gas, if my preacher math is correct.